Innovation points and key solutions of Swing Arm Garbage Truck

The development of Swing Arm Garbage Truck is mainly to better protect the environment and solve the problem of secondary environmental pollution caused by transportation operations. The components of the transport seals such as shrink wire, tarpaulins are designed and optimized. What are the innovations and the key to solving the Swing Arm Garbage Truck?

Here is the content list:

• Rebound adjuster

• Crossbar telescopic device

• Noose device

Rebound adjuster

Due to the unreasonable tight design of the steel wire of the Swing Arm Garbage Transport Truck, the shrinking steel wire is easy to falls off the wheel groove during the collection operation, which affects the degree of automation. The lower end of the adjustment spring in the adjustment tube is connected with the upper part of the adjustment rod in the adjustment tube, and the other end of the adjustment rod is installed with an adjustment wheel, which is convenient for the wire to slide around the wheel, and the shrinking wire is under the action of the adjustment spring. Keeping it locked all the time can effectively solve the problem of shrinking steel wire coming out of the groove.

Crossbar telescopic device

To effectively prevent the deformation of the sidewalls of the carriage body, the Swing Arm Waste Collection Truck has a telescopic cross-bar telescopic device (consisting of a telescopic rod and a telescopic tube), and the telescopic rod is inserted into the telescopic tube. The crossbar wheel (located on the front and rear ends of the crossbar) is installed in the groove of the crossbar slideway, which helps the front and rear ports of the crossbar to move more flexibly and freely in the slideway groove. The anti-dropout device designed in the structure is fixedly installed on the front and rear ends of the crossbar outside the crossbar wheel, which can effectively prevent the crossbar from being detached from the groove of the slideway due to excessive pulling during operation. The limit button is fixed on the right side of the crossbar and always corresponds to the roller groove (the roller groove is connected with the traction wire in rolling). To effectively prevent the occurrence of slippage, the traction wire of the noose device is designed to be connected to the crossbar with a limit button, so that when the traction wire and the crossbar slide over the rolling wheel limit button also pass through the flow wheel groove correspondingly.

Noose device

Swing Arm Garbage Truck noose device is mainly composed of pulley (with hand crank), traction axle wheel, retractable axle wheel, etc. The main components are all high-quality and regular standard accessories, which ensures the quality of the Swing Arm Garbage Truck. While one end of the traction and shrinking wire is fastened to the noose pulley, the other end of the wire passes through the right side wall of the vehicle body and is fixed to the crossbar. On the other side, the Skip loader garbage truck rolling wheel is installed on the top of the frame between the front and rear sidewalls. The crossbar can slide along the groove of the crossbar slideway under the action of the traction wire and the shrinking wire. By shaking the hand clockwise or counterclockwise. The crank handle (at the same time, a motor and a reverse switch can be added to replace the hand crank handle for automatic operation), adjust the tightness of the steel wire and realize the opening and covering of the garbage container with the tarpaulin.

The above is about innovation points and key solutions of Swing Arm Garbage Truck. If you are interested in Swing Arm Garbage Truck, you can contact us, our website is www.garbagetruckvehicle.com.